Metsoako ea PVC bakeng sa Wire & Cable Sheathing le Insulation

Metsoako ea PVC bakeng sa Wire & Cable Sheathing le Insulation

Tlhaloso e Khutšoanyane:


  • Boitsebiso :PVC Resin + Additives
  • Ho thatafala :ShoreA80-A90
  • Density :1.22-1.35g/cm3
  • E sebetsa:Extrusion Molding
  • :
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    Tlhaloso ea Sehlahisoa

    Lik'hemik'hale tsa Cable tsa PVC ke lisebelisoa tsa thermoplastic tse nkiloeng ho sebetsa liqapi tsa polyvinyl chloride, tse hlahisoang e le granules.Thepa e fapaneng e fetisetsoa ho metsoako ho latela lits'ebetso le maemo a ts'ebetso ea ntho.Li-granules tsa Cable tsa PVC li sebelisoa indastering ea lithapo le tsa conductor bakeng sa ho etsa li-insulation le terata e sireletsang le jekete ea sheath ea cable.

    PVC General Sheathing Grade Compound e etsoa ka lisebelisoa tse tala tsa PVC tsa boemo bo holimo, ho latela ka tieo melao ea RoHS (Heavy Metal & Lead-Free).Hape re fana ka thepa ea mocheso o phahameng, e fokolang mosi oa zero-halogen le thepa e thibelang malakabe, e leng se etsang hore e be tse loketseng bakeng sa lisebelisoa tsa terata le lithapo.Melemo ea ho sebelisa metsoako ea PVC bakeng sa lithapo e kenyelletsa katleho ea litšenyehelo, ho lieha ha lelakabe le ho tšoarella.

    Mefuta ea Lihlahisoa

    Lik'hemik'hale tsa Mohala oa Mohala le oa Cable

    Metsoako ea Jacket ea Wire le Cable Sheathing Jacket

    Motsoako oa Insulation oa FR (Flame Retardant).

    Motsoako oa FRLS (Flame Retardant Low Smok).

    HR (Heat Resistant) PVC Cable Granules

    ROHS & UL Compliant Compounds

    UL Compliant Compounds

    Etellang Free Compounds

    Motsoako o thehiloeng ho Calcium-Zinc

    Mocheso o Batang (-40℃) Motsoako o hanyetsanang le oona

    70 °C & 90 °C PVC Insulation Sheathing

    80 °C (ST1) & 90 °C (ST2) Granules

    Ho Tlatsa PVC ho na le 70 °C Granules

    Sesebelisoa sa Sehlahisoa

    ● Mohala oa Likoloi le Mohala

    ● Thapo ea PVC ea Green Energy

    ● Ho haha ​​Mohala oa PVC le Cable

    ● Ntlo e tšoara lithapo le lithapo

    ● Lithapo tsa lisebelisoa tsa motlakase

    ● Lithapo Tsa ho Pholoha Mollong

    ● Lik'habole tsa Photovoltaic Solar (PV).

    ● Lipompo tse ka tlas'a metsi lithapo tse bataletseng le tse chitja

    ● Lithapo tsa Electronic Control

    ● Lithapo tsa ka tlung le tsa indasteri

    ● Coaxial Cable

    ● Coated Wire Mesh (Wire Fence)

    ● Lithapo, tsa Khokahano & Lithapo tsa Boitsebiso

    ● Lithapo tsa puisano (lithapo tsa mohala, lithapo tsa phetiso ea data)

    ● Thapo e Khethehileng (Lithapo tsa Lisebelisoa, Lithapo tsa Co-axial, Lithapo tsa Taolo, Lithapo tsa Mollo)

    ● Lithapo tsa Motlakase (Lithapo tsa Motlakase o Tlaase, Lithapo tsa Motlakase o Hare, Lithapo tsa Motlakase o Phahameng le o Eketsehileng)

    3
    2

    Lintlha tsa Sehlahisoa

    Lintlha tsa Motheo .Eco-friendly .Ha ho Monko.Ha e na Chefo
    · E babatsehang Durability
    .Koba e hanyetsanang .Abrasion Resistant
    .Lits'ebetso tse Khabane tsa Molding
    .Ponahalo e Lahlehileng kapa Matt
    .Mekhoa e hlophisitsoeng
    .Lintho tse Tsoileng Matsoho tsa Lik'hemik'hale le 'Mele
    Sebopeho se Fetotsoeng E hanyetsanang le UV
    Anti-Oli /Acid /Gasoline / Ethyl Alcohol
    E Hanela ho falla
    Koba e hanyetsanang .Abrasion Resistant.
    E hanana le Sterilization
    Mocheso o Tlase Resistance
    Mocheso Resisitance
    Mosi o Monyenyane oa Halogen
    Se thibang lelakabe
    115

    Malebela a Metsoalle

    INPVC e etsa mefuta e mengata e tloaelehileng ea lik'hemik'hale tsa PVC empa haeba u batla ho fumana tharollo bakeng sa ts'ebeliso e khethehileng, phihlelo ea INPVC, eseng feela ka lik'hemik'hale tsa PVC tsa cable empa PVC ka kakaretso, e ka thusa ho theha motsoako oa PVC o hlophisitsoeng bakeng sa hau. ditlhoko.

    Sheba ka har'a mefuta ea rona ea lik'hemik'hale tsa PVC bakeng sa lithapo tse ka holimo kapa buisana le litsebi tsa rona tsa tekheniki mabapi le seo u batlang ho se fihlela ka komporo ea hau ea cable 'me u bone hore na re ka u thusa joang.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona

    Kopo e ka Sehloohong

    Ente, Extrusion le Blowing Molding